Custom Artificial Restaurant Feature Ficus for Restaurants & Dining Rooms
Application: Restaurants & Dining Rooms · Custom heights 3–6 m
We build custom artificial ficus trees for restaurants and dining rooms — 3–6 m specimens, NFPA 701 fire-retardant treatment available as an option, engineered per project. Restaurant trees frame the dining experience and have to survive a kitchen environment without dropping leaves on the plates below. We build wipe-clean, fire-rated specimens specified to the room.
- Canopy height set to clear seated guests
- Wipe-clean matte PE foliage
- No structural work required for installation
Restaurant Feature Ficus Build Spec
| Unit Size | 3–6 m, canopy 2–4 m |
|---|---|
| Height Range | 2–8 m (customizable to your photos or drawings) |
| Trunk | Sculpted fiberglass trunk with multi-stem branching. |
| Foliage | PE and PU materials; optional UV-resistant finish for outdoor use. |
| Base | Steel plate base — set in concrete or installed in a planter. |
| Fire Retardancy | Optional NFPA 701 / BS 5867. |
| Maintenance | No routine maintenance — no watering, feeding or leaf cleanup. |
| Lead Time | Standard builds 7–10 days; custom builds 15–20 days. |
What This Venue Needs
Sizing
Restaurant specimens run 1.8–6 m, with canopy set to clear seated guests and a low planter profile for sight lines.
Compliance & Anchoring
fire-retardant foliage to NFPA 701 available as an option; wipe-clean, matte foliage finishes for dining environments.
Restaurant Feature Ficus specified for Restaurants & Dining Rooms
Restaurant Feature Ficus (SKU VW-FIC-600) is quoted at 3–6 m for restaurants and dining rooms, against the 1.8–6 m height band this venue is engineered for. Cleanability above tables is treated as a specification item, not an afterthought.
Buying parameters for this venue
| Reference SKU | VW-FIC-600 |
|---|---|
| Species height range | 3–6 m |
| Venue height band | 1.8–6 m |
| Base & fixing | Low planter profile · Seated sight-line setout |
| Documentation | For VW-FIC-600: fire-retardant foliage to NFPA 701 available as an option; wipe-clean, matte foliage finishes for dining environments. |
Installation, materials & documentation
Foliage over dining zones is specified wipe-clean, and the fire documentation names the dining area explicitly - that is the line reviewers check first in restaurant fit-outs.
Branch rings within reach separate by hand for cleaning, and planter rims are detailed so they do not trap food debris; the trunk finish is matte to avoid glare from downlights above tables.
Other Trees Specified for Restaurants & Dining Rooms
Other artificial trees specified for restaurants and dining rooms: Mediterranean Olive Tree · Coconut Palm Tree · Pachira / Money Tree
Ordering & Specification FAQs
What buyers ask when specifying ficus trees for restaurants and dining rooms — MOQ, lead time and this venue's requirements.
MOQ is project-based rather than per-SKU. A restaurant ficus at 3–6 m with a 2–4 m canopy can be quoted on its own; the multi-stem branching and the canopy height above seated guests are specified per tree, and a single replacement tree is quoted exactly like a full dining-room scheme.
7–10 days for standard builds, and 15–20 days for custom builds. Lead time starts from approved drawings rather than from the enquiry, and the canopy height over seated guests is a drawing item — it is usually the last thing to be signed off and the first thing to delay a build.
No. The foliage is fixed and produces no leaf drop, so the area below stays clean through service.
Yes. Canopy height and spread are specified to your seating plan so the tree reads as mature without intruding on tables.
Yes — 3–6 m with a 2–4 m canopy on a sculpted multi-stem trunk, with canopy height set to clear seated guests and wipe-clean matte PE foliage for daily service. No structural work is required for installation, and the finish is specified per project rather than off the shelf.
Configure This Tree for Your Restaurants & Dining Rooms
Height, trunk finish, foliage density, planter and base plate — tell us the venue and we'll send CAD options within 12 business hours.