Custom Artificial Coconut Palm Tree for Restaurants & Dining Rooms
Application: Restaurants & Dining Rooms · Custom heights 3–7 m
We build custom artificial coconut palms for restaurants and dining rooms — 3–7 m specimens, NFPA 701 fire-retardant as standard, engineered per project. Restaurant trees frame the dining experience and have to survive a kitchen environment without dropping leaves on the plates below. We build wipe-clean, fire-rated specimens specified to the room.
- Salt-air safe build with stainless fixings
- UV-stabilised fronds, color-matched to natural coconut palm
- Ballasted base for decks, or direct-bolt anchoring
Coconut Palm Tree Build Spec
| Height Range | 3–7 m |
|---|---|
| Trunk Material | Fibreglass trunk in your choice of palm-ring density; stainless fixings specified for coastal sites. |
| Foliage / Leaf Fabric | UV-stabilised PE fronds, colour-matched to natural coconut palm. |
| Planter & Base | Ballasted base for decks and terraces, or direct-bolt anchoring into a concrete slab. |
| Fire Retardant Class | NFPA 701 fire-retardant foliage as standard; EN 13501 B-s1,d0 available for EU projects. |
| UV / Outdoor Rating | SGS-tested 3–5 years color-fastness; salt-air safe. |
| Wind Resistance | Interior rated as standard; exterior builds engineered per site wind-load and documented per project. |
| Packing & Handling | Most trees ship fully assembled; long specimens are braced on timber cradles. Foliage flat-packed and planters nested to cut volume. A piece-by-piece CBM packing sheet ships with every quotation. |
| Container Yield | ~18 pcs of 4 m coconut palms per 40 ft HQ. |
| Typical Applications | Beach resorts, pool decks, water parks, coastal restaurants. |
| Lead Time | 25–35 days for standard heights; 45–60 days for custom builds above 6 m. |
| MOQ | Project-based; mix-and-match across catalog SKUs. |
| Certifications | NFPA 701 · SGS UV · CE · RoHS · ISO 9001 |
What This Venue Needs
Sizing
Restaurant specimens run 1.8–6 m, with canopy set to clear seated guests and a low planter profile for sight lines.
Compliance & Anchoring
NFPA 701 fire-retardant foliage as standard; wipe-clean, matte foliage finishes for dining environments.
Other Trees Specified for Restaurants & Dining Rooms
Other artificial trees specified for restaurants and dining rooms: Mediterranean Olive Tree · Restaurant Feature Ficus · Pachira / Money Tree
Ordering & Specification FAQs
What buyers ask when specifying coconut palms for restaurants and dining rooms — MOQ, lead time and this venue's requirements.
MOQ is project-based rather than per-SKU, and you can mix and match across the catalogue. A hotel atrium package and a single replacement specimen are both quoted the same way — tell us the venue and the quantity, and the quotation is built around that project.
25–35 days for standard heights, and 45–60 days for custom builds above 6 m. Lead time starts from approved drawings rather than from the enquiry, so the drawing turnaround is the part worth confirming early.
No. The foliage is fixed and produces no leaf drop, so the area below stays clean through service.
Yes. Canopy height and spread are specified to your seating plan so the tree reads as mature without intruding on tables.
Yes — height, trunk finish, foliage density, planter and base plate are all specified per project. Send the venue drawing or a reference photo and our designers return CAD options within 2 business hours.
Configure This Tree for Your Restaurants & Dining Rooms
Height, trunk finish, foliage density, planter and base plate — tell us the venue and we'll send CAD options within 2 business hours.