Custom Artificial Tree Engineering — Reference Photo to CAD to Installation
Send a reference photo, a Pinterest board or a napkin sketch with target dimensions. Our botanical engineers turn it into CAD drawings, then a steel-framed, flame-tested, container-ready reality.
What "Custom" Means Here
Not reseller-swapped planters — every dimension is engineered, welded and assembled in our own factory.
Anything Up To 12 Meters
- Custom heights & silhouettes
Atrium giants, canopy widths and trunk girth matched to your architectural drawings.
- Trunk engineering
Galvanized steel cores, wind-load calculations and anchoring plates documented for structural engineers.
- Species matching
Olive, banyan, jacaranda, Japanese maple — foliage blended leaf-by-leaf to match your target palette.
- Venue-driven compliance
Flame ratings, UV treatments and structural reports packaged for your local approval process.
Why Buyers Choose Us
Four material decisions decide how an artificial tree holds up to years of sun, rain and cleaning — so we make them at the start, not as an upgrade.
Fibreglass Trunks
Trunks are hand-moulded in fibreglass and resin over a galvanised steel core, so bark texture and aerial-root detail survive the container, and the column carries the weight of a wide canopy.
PE Branches & Foliage
Branch sets are moulded in polyethylene on steel or fibreglass cores — flexible enough to shape and re-shape on site, and detailed enough that the silhouette stays crisp instead of sagging.
UV & Anti-UV Stabilised
Foliage compounds are dosed with UV stabilisers and colourfast pigments — what helps outdoor palms, olives and cedars hold their colour through long exposure to strong sun.
Flame-Retardant Options
Flame-retardant formulations can be specified for interior projects — tell us the standard that applies in your market and we quote the matching build.
Four Steps, Fully Transparent
Brief & Spec Sheet
Reference images, dimensions, venue constraints and compliance targets become a signed-off specification.
CAD + 3D Approval
Detailed blueprints and renders — revised until you and your architect are satisfied.
Handcraft & Photo QC
Fabrication with photo updates at every milestone: frame, bark, foliage and flame test.
Delivery & Installation
CBM-optimized container loading plus optional supervised installation anywhere in the world. See installed projects for scale.
From hand-drawn conceptual sketches to finished lifelike artificial trees, we bridge imagination and reality.
Have a Reference Photo?
Send it over WhatsApp with rough dimensions — you'll get a feasibility answer and budget range the same day.
Architectural Engineering vs. Generic Decorative Suppliers
Most mass-market suppliers treat artificial trees as casual craft items. We engineer commercial-scale botanical installations specifically built to survive public liability audits, desert climates, and stringent life-safety codes.
Generic Decorative Suppliers
- Fragile Iron/PVC Internal Cores: Thin uncertified pipes that sag, bend, or crack under large branch weight or mechanical HVAC air currents.
- Superficial Spray-On Fire Retardant: Sprays that wash off, emit toxic VOCs, and fail NFPA 701 or EN 13501-1 municipal fire inspections.
- Rapid Chalking & UV Degradation: Cheap recycled plastics turn brittle and discolor to ugly blue-gray within 6 months of desert sun exposure.
- Zero Engineering Submittals: No CAD details, no live-load wind calculations, and no structural anchor blueprints for local municipal permits.
Certified Commercial Botanical Engineering
- Internal Q235 Hot-Dip Galvanized Chassis: Certified full-penetration welding and heavy-duty baseplates designed for 10-meter spans and lateral wind loads.
- Inherently Flame Retardant (IFR) Resins: Fire retardant compounds infused directly into the polymer chain during molding — guaranteed compliant with NFPA 701 and EN 13501-1 Class B1.
- Industrial Grade UV-50+ Inhibitors: Formulated to withstand scorching Middle Eastern heat (50°C+) without brittleness or pigment degradation.
- Turnkey Tender & Submittal Packages: We deliver complete architectural submittal files including structural calculations, baseplate bolt patterns, and MEP shop drawings.
Frequently Asked Questions
How bespoke tree engineering is scoped, drawn and quoted per project.
Send a reference photo, the venue type and rough dimensions over WhatsApp or the RFQ form. The engineering desk returns a feasibility answer and a budget range the same day, then develops CAD options for approval before production begins.
Up to 12 m for atrium installations. Above the size that fits a container upright, the tree is knocked down and assembled in place, with the sequence documented for the rigging crew.
Base plate loading, anchoring method and connection details are issued as drawings so your structural engineer can sign them off. Exterior builds are engineered per site wind load and documented per project.
25–35 days for standard heights, and 45–60 days for custom builds above 6 m. Lead time runs from approved drawings rather than from the first enquiry.
Yes. Foliage tone is colour-matched against your reference sample, and trunk finish runs from natural treated wood to hand-sculpted fiberglass bark. Custom Pantone matching is available for blossom and seasonal foliage.
Supervised installation is available worldwide, and for very large builds the factory documents the assembly sequence for your own rigging crew. Most trees arrive fully assembled and are simply positioned and fixed.