Mon–Sat 9:00–19:00 (UTC+8)

Custom Artificial Event & Wedding Palms for Weddings & Event Venues

Application: Weddings & Event Venues · Custom heights 5–8 m

We build custom artificial event palms for weddings and event venues — 5–8 m specimens, NFPA 701 fire-retardant treatment available as an option, engineered per project. Wedding trees are the backdrop for photos and aisles, reused season after season. We build movable, UV-treated palms and blossom trees with optional festoon lighting channels.

  • Two-person lift weight for back-of-house moves
  • Optional pre-installed festoon light channels
  • Ballasted base for lawns, or a wheeled dolly
Technical Specifications

Event & Wedding Palms Build Spec

Unit Size5–8 m, canopy 3–5 m
Height Range2–10 m (customizable to your photos or drawings)
TrunkLightweight fibreglass trunk on a steel core, built to be moved by two people.
FoliagePE and PU materials; optional UV-resistant finish for outdoor use.
BaseSteel plate base — set in concrete or installed in a planter.
Fire RetardancyOptional NFPA 701 / BS 5867.
MaintenanceNo routine maintenance — no watering, feeding or leaf cleanup.
Lead TimeStandard builds 25–35 days; custom builds 45–60 days.
Sizing & Compliance for Weddings & Event Venues

What This Venue Needs

Sizing

Wedding specimens run 2–8 m, built to move on a ballasted base or wheeled dolly for storage between events.

Compliance & Anchoring

UV-treated foliage SGS-tested 3–5 years; optional pre-installed festoon light channels.

Project Specification

Event & Wedding Palms specified for Weddings & Event Venues

Event & Wedding Palms (SKU VW-EVT-650) is quoted at 5–8 m for weddings and event venues, against the 2–8 m height band this venue is engineered for. Strike-down and re-use across dates are built into the part numbering.

Buying parameters for this venue

Reference SKUVW-EVT-650
Species height range5–8 m
Venue height band2–8 m
Base & fixingBallasted base or wheeled dolly
DocumentationFor VW-EVT-650: UV-treated foliage SGS-tested 3–5 years; optional pre-installed festoon light channels.
Blossom tree reference, project archive
Blossom tree reference, project archive

Installation, materials & documentation

Temporary installations use non-penetrating ballast and padded feet so the venue floor is untouched; the tree is assembled in hours and strikes in reverse order at the end of the event.

Transport cases are sized to the knock-down sections, and the same batch can be re-used across dates - the flame report and base-loading sheet travel with the set for each venue's safety file.

Buyer Questions

Ordering & Specification FAQs

What buyers ask when specifying event palms for weddings and event venues — MOQ, lead time and this venue's requirements.

MOQ is project-based rather than per-SKU, and event palms are built to be moved — a 5–8 m trunk is a two-person lift, so a single palm for one ceremony is a realistic order. Ballasted bases and wheeled dollies are quoted as options, and repeat bookings are priced per event rather than per season.

25–35 days for standard builds, and 45–60 days for custom builds. Lead time starts from approved drawings rather than from the enquiry. Because the specimen is built to a two-person lift weight, the ballast or dolly choice and the handling route are worth settling before build.

Yes. Event palms are built to move by two people on a ballasted base or wheeled dolly, with no irrigation between uses.

Festoon light channels can be pre-installed at the factory on event palms and blossom trees.

Yes — 5–8 m with a 3–5 m canopy on a lightweight fibreglass trunk over a steel core, built to a two-person lift weight so it can be moved between events. Ballasted bases for lawns or a wheeled dolly, optional pre-installed festoon light channels, and UV-treated fronds for repeated outdoor use.

Configure This Tree for Your Weddings & Event Venues

Height, trunk finish, foliage density, planter and base plate — tell us the venue and we'll send CAD options within 12 business hours.

WhatsApp an Engineer All Solutions